Gold Member Since 2016
Audited Supplier
Nantong Jielei Machinery Co., Ltd.

Weaving, Machine, Braiding Machine manufacturer / supplier in China, offering High Speed Braiding Machine 2, High Speed Weaving Machine 16*4 Spindles, High Speed Braiding Machine 32*2 and so on.

(/ )

High Speed Braiding Machine 2

FOB Price: US $1,800 / set
Min. Order: 1 set
Min. Order FOB Price
1 set US $1,800/ set
Get Latest Price
Port: Shanghai, China
Production Capacity: 2000sets/Year
Payment Terms: L/C, T/T

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: all kinds
  • Condition: New
  • Transport Package: Wooden Case
  • Origin: China
  • Certification: CE, ISO9001: 2000
  • Trademark: xinglong
  • Specification: 1.5cbm
  • HS Code: 84479090
Product Description
High Speed Braiding Machine 2High Speed Braiding Machine 2PGF high speed weaving machine is applicable for raw material like cotton yarn,fiber,PP yarn,metal thread etc,and it can knit various elastic and nonelastic textiles like cylinder shape,tube shape,knitting shape as well as curtain tapes,shoelaces,silk ribbon,decoration tapes etc.
PGF high speed weaving machine adopts frequency conversion regulation technology to control speed ,and can achieve yarn-cutting and self-stop,which is easy to operate and high in automation degree.According to intensity of raw material,it is easy to adjust working status so as to improve product quality,product grade and lower cost.
ELECTRICAL PART
Hi-speed sealing knitting machineOperation manualTotal 11 pages
Page 6
7.2 regular faults and solution methods for frequency conversion machine in below table
Fault display Fault content & descriptionTreatment methods
E.O.C.AOvercurrent in acceleration1, check whether the motor is shorted or partially shorted;
2, extend the acceleration time
3, the configurations of frequency conversion machine is not rational, and enlarge the capacity of the frequency conversion machine;
4, reduce the torque to improve the rated value.
E.OC.nOvercurrent in constant speed1, check whether the motor is shorted, whether the output wire is insulated well;
2, check whether the motor is stopped to run, whether the mechanical load waves;
3, check whether the capacity of the frequency conversion machine is too small, and enlarge the capacity of the frequency conversion machine;
4, check whether .the voltage of the power network waves.
E.OC.d
 
E.OC.S
Overcurrent in deceleration
Overcurrent in stopping
1 check whether the wire insulation is well, whether the motor is shorted;
2 enlarge the deceleration time;
3 replace by a frequency conversion machine of larger capacity;
4 the braking capacity of direct current is too big, and reduce the braking capacity of direct current;
5 for the machine fault, send back to the factory for repair.
E.GF.S
E. GF.a
E. GF.n
E. GF.d
Shortcut to ground1 check whether the wire of motor is shorted;
2 improve the power network, and check whether there is the wave of voltage;
3 send back for repair
E.ou.S
 
E.OU.a
 
E.OU.n
 
E.OU.d
Overcurrent in acceleration
Overcurrent in deceleration
Overcurrent in constant speed
Overcurrent in deceleration
1 extend the deceleration time, or add with the brake resistor;
2 improve the power network, and check whether there is the wave of voltage.
E.Fb.S
E. Fb.a
E. Fb.n
E. Fb.d
Fuse melted
 
 
 
If fuse melted, send back for repair
E.Lu.s
E. Lu.A
E. Lu.n
E. Lu.d
Low voltage1 check whether the voltage is normal;
2 check whether the load waves;
3 check whether the phase is lacked.
E.OH.S
E. OH.A
E. OH.n
E. OH.d
Overheat of frequency
conversion machine
1 check whether the fan is stopped to run, whether the radiating piece is covered by impurity;
2 check whether the environment temperature is normal;
3 check whether the airing space is enough, whether the air is convective;
E. OL.A
E. OL.n
E. OL.d
Overload of frequency
conversion machine
150% per minute
1 check whether the frequency conversion machine is of smaller capacity, whether is covered by impurity;
2 check whether the load of the machine is blocked;
3 V/F curve is not set well, and shall be reset.
 

 
Hi-speed sealing knitting machineOperation manualTotal 11 pages
Page 7
continued
E.OA.A
E.OA.n
E.OA.d
Motor overload 150% per one minute1 check whether the mechanical load moves;
2 the motor distribution is too small;
3 the motor is overheated, and the insulation becomes worse;
4 check whether the voltage moves greatly;
5 check whether the phase is lacked;
6 the mechanical load is enlarged.
E.OT.A
E.OT.n
E.OT.d
Over-torque of motor1 check whether the mechanical load moves;
2 check whether the motor configuration is too small.
E.bs.A
E. bs.n
E. bs.d
E. bs.s
The electromagnetic contactor assistant coil does not feedback.Send back for repair
E.bT.A
E. bT.n
E. bT.d
The brake transistor is broken.Contact with the factory.
E.EC.S
E. EC.n
E. EC.d
E.EC.A
CPU faultContact with the factory.
E.EE.S
E. EE.n
E. EE.d
E.EE.A
E Prom faultContact with the factory.
ERExternal interference Insulation with the interference resource
ESEmergency parkingUnder the emergency status
204-20mA broken circuitConnect with the above broken one
PrMistake of specification setupCorrect specification of setup
DCbBrake status of direct currentUnder the brake status of direct current
 
High Speed Braiding Machine 2
 
Send your message to this supplier
Avatar
Ms. Olivia
Seller
*From:
To: Ms. Olivia
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now